Installation Instructions can be found here:

https://github.com/cnvogelg/plipbox/blob/master/doc/src/amiga.md


Latest Amiga driver can be found here:

http://www.lallafa.de/files/plipbox/plipbox-0.6.zip


Setup Summary:

1. Install plipbox.device driver in your Amiga "devs:network/" folder (if using Coffin OS with Amiga then ignore this step and run the internet setup wizard instead).

2. After driver installation, always power on the Plipbox before powering on your Amiga (or at the same time). If the Plipbox is powered on after the Amiga then no internet connectivity will be found.

3. Lastly you'll need a tcp/ip stack on your Amiga such as AmiTCP, Genesis, MiamiDx or Roadshow etc

Amiga Ethernet / Internet Network Adapter. Plipbox for A500 A600 A1200 A1000 A2000 A3000 A4000 etc

Add internet capability / Ethernet networking to your classic Commodore Amiga computer.

The Simulant Plipbox is a pre-made and assembled kit housed in a custom 3D printed case which allows you to get your Amiga online. It allows an Amiga to connect to an ethernet network via the parallel port.

Each unit is firmware flashed and tested to be working before delivery. (Tested here on both Amiga 600 and Amiga 4000).

Easy to setup, and the Amiga driver is provided via email after ordering.

Works with standard classic Amigas and also supported by the Vampire accelerator cards with Coffin OS (Coffin OS even includes the Plipbox driver in its Internet Setup Wizard so it is completely plug and play!)

Powered by a "Mini USB cable" using 5v. (USB cable is NOT INCLUDED but please message if you require a USB cable and one may be able to be added to your order if in stock). A standard phone charger USB plug can be used or USB port from the Amiga or other nearby computer etc.


Usage Notes:

1. Install plipbox.device driver in your Amiga "devs:network/" folder (if using Coffin OS with Amiga then ignore this step and run the internet setup wizard instead).

2. After driver installation, always power on the Plipbox before powering on your Amiga (or at the same time). If the Plipbox is powered on after the Amiga then no internet connectivity will be found.

3. Lastly you'll need a tcp/ip stack on your Amiga such as AmiTCP, Genesis, MiamiDx or Roadshow etc


This kit is based on Lallafa's "Plipbox" along with the Kuro68k PCB board.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Amiga Ethernet / Internet Network Adapter. Plipbox for A500 A600 A1200 A1000 A2000 A3000 A4000 etc

  • Product Code: amiga-plipbox
  • Availability: In Stock
  • £29.99


Related Products

Retro Wifi SI - rs232 serial port internet computer modem

Retro Wifi SI - rs232 serial port internet computer modem

Wifi Internet For Old Computers With rs232 Serial PortRetro Wifi SI - Internet and Wifi networking f..

£32.99

Tags: plipbox, amiga, network card, network adapter, network adaptor, internet, networking, ethernet