Amstrad 6128 Plus Floppy Disk Drive Emulator Gotek USB complete fitting kit.
This product includes the 34 > 26 pin adaptor, the Gotek floppy
emulator drive, 3-digit LCD display and front faceplate (we do sell them all
separately too if needed).
Adaptor and complete fitting kit for swapping your internal floppy drive
with a Gotek floppy disk usb emulator drive in your Amstrad 6128 PLUS
faceplate/bracket part is 3d printed, so has a few rough edges but as
you can see in the photos, they look very good and are a very secure and
non-destructive way to mount your Gotek drive. No mods, cuts or
alterations to your Amstrad casing are needed. Comes in white recyclable PLA plastic.
easy insert of USB stick (not included) and nice placement of the Gotek
buttons making it easy to press them and also see the display.
The design is based on and modified from: www.thingiverse.com/thing:2876318 which is sold under Creative Commons Share-alike license.
should fit well but some slight careful sanding or filing may be needed
due to slight variations in printing or old Amstrad cases warping/cases
being screwed together slightly tighter/differently etc.
does not fit the standard "CPC" computers, it only fits 6128 PLUS
Amstrad. Please see our other listing for the Amstrad CPC Gotek brackets
JUST POWER UP THE GOTEK ONCE MOUNTED IN YOUR COMPUTER, OR YOU MAY BREAK
YOUR GOTEK DRIVE, MAKE SURE TO MODIFY AND HAVE THE RIGHT RIBBON CABLE
AND POWER LEAD READY FIRST. THE INTERNAL POWER AND DATA RIBBON WILL PLUG
AND PLAY EXCEPT YOU MUST SWAP THE 5v and 12v POWER PINS, THE GOTEK IS
5v ONLY SO MUST NOT BE POWERED WITH THE 12v WIRE.
also sell other Amstrad and Sinclair brackets etc as well Spectrum,
Atari, Amiga A500, A600 and A1200. Please make sure to buy
the correct items for your system (photos may show a different model).